Filter
Top Products
DIRECT STATION SELECTION/BUSY LAMP FIELD (DSS/BLF) CONSOLE
Busy Out Status Console
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 149
6. The DSS/BLF Console can be provided with a Message Wait (MW) key, a Do Not Disturb (DND) key, a
Night Transfer (NT) key, a Wake Up No Answer (WU) key, a Room Cutoff (RC) key, and a Agent Busy
Out (BYO) key for the following purposes:
• MW key Message Waiting Set/Cancel/Status Display
• DND key Do Not Disturb Set/Cancel/Status Display
• NT key Day/Night mode change for the associated tenant
• WU key Automatic Wake Up No Answer Cancel/Status Display
• RC key Room Cutoff Set/Cancel/Status Display
• BYO key Agent Busy Out - UCD Status Display
These keys must be assigned to the last three (3) keys (key no. 57, 58 and 59) on the DSS/BLF Console.
7. Key operation from MW, DND, WU, and BYO key on the DSS/BLF Console are effective for only the first
48 DSS keys (key no. 00 to 47), which have two (2) LEDs (red and green) in each key. Direct Station Se-
lection, busy status indication, and Line Lockout status indication are effective for all 60 keys on the DSS/
BLF Console.
8. When the following operations from the DSS/BLF Console are used, the Function Mode key must be as-
signed to one of 60 DSS keys.
• Message Waiting Set/Cancel using MW key
• Do Not Disturb Set/Cancel using DND key
• Automatic Wake Up No Answer Cancel using WU key
9. A 4DLC/8DLC card is required when a DSS/BLF Console is installed.
Busy Out Status Console
General Description
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be used as a Busy Out Sta-
tus Console. This feature is activated by use of a Function Mode key on a DSS/BLF Console. The Busy Out
Status for each station is indicated by a red LED associated with each button.
Station Application
All stations with an associated DSS/BLF Console.
Operating Procedure
To display station Busy Out (BYO) status
1. Press the Function Mode key on the DSS/BLF Console assigned for Busy Out Status display. An LED as-
sociated with the BYO key lights.
2. When stations are currently in the Busy Out state, their associated LED will light green.
3. Press the same Function Mode key to return to DSS/BLF mode, if desired.