Filter
Top Products
CALL PARK
Call Park - System
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 93
CALL PARK
General Description
This feature enables a station user or attendant to place a call into predesignated Call Park locations. The station
user or attendant is then free to process other calls. This feature is available system wide and for individual ten-
ants.
Call Park - System
General Description
When a call is parked by Call Park-System, the call can be retrieved from Call Park by any station in the system.
Station Application
All stations and Attendant Consoles.
Operating Procedure
To place a call into Call Park-System
• From a Single Line Telephone
1. Press the FLASH key (or momentarily press the hookswitch) and receive feature dial tone.
2. The call in progress is placed on Consultation Hold.
3. Dial the Call Park-System feature access code.
4. Dial the Call Park-System location number (00-19) and receive service set tone. (If the Call Park number is
busy, dial another location number using the Step Call feature until an idle park location is accessed).
5. Restore the handset.
• From a Multiline Terminal with LCD
1. Press the Transfer key and receive feature dial tone.
2. The call in progress is placed on Consultation Hold.
3. Dial the Call Park-System feature access code. The first available Call Park location is selected by the sys-
tem and displayed in the LCD. Receive service set tone.
4. Restore handset.
OR
1. Press the Call Park-System feature key and receive service set tone.
2. Restore the handset.
• From a Multiline Terminal without LCD
1. Press the Transfer key and receive feature dial tone.
2. The call in progress is placed on Consultation Hold.
3. Dial the Call Park-System feature access code, or press Call Park-System feature key.