Filter
Top Products
DISTINCTIVE RINGING
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 154
NDA-24271, Issue 1.0
11. The lamp indication patterns are as follows:
• Incoming internal calls Red, 120-ipm flashing
• Incoming external calls Green or Red, 120-ipm flashing
The lamp color for incoming external calls can be selected to be green or red.
12. The lamp color for incoming external calls can be designated on a per-trunk-route basis.
13. The distinctive lamp indication is valid for Direct Inward Termination, Automated Attendant, Direct Inward
Dialing, and Tie line incoming call.
14. The flashing lamp color depends on system data (assigned for Distinctive Ringing (CM08, 137)) and is used
to indicate the termination of a transferred external incoming call.
15. If the system is installed behind Centrex or the main PBX, this feature provides Distinctive Ringing patterns
to the Multiline Terminal in the system so that the station user can distinguish between internal calls from
the main PBX and external incoming calls. The C.O. trunk to the main PBX must be assigned on Trunk -
Direct Appearances on the Multiline Terminal.
16. When Distinctive Ringing in behind system is activated, Delayed Ringing is not available for the related
C.O. trunk.