Filter
Top Products
STEP CALL
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 300
NDA-24271, Issue 1.0
STEP CALL
General Description
This feature allows the Attendant or station user, after calling a busy station, to call an idle station by simply
dialing an additional digit. This feature will operate only if the number of the idle station is identical to that of
the busy station in all respects, except the last digit.
Station Application
All stations.
Operating Procedure
1. The dialed station (220) is busy.
2. Dial 5.
3. If station 225 is idle, the call will be connected there.
Service Conditions
1. If the second selected station is also busy, Step Call can continue until an idle station is reached. When Call
Forwarding - All Calls is set, and a station called during Step Call meets the Call Forwarding condition, Call
Forwarding will occur.
2. Step Call can be activated when busy tone is returned on a Consultation Hold or Call Park attempt.
3. When a call is rerouted by Call Forwarding, and the station to which the call was forwarded is busy, Step
Call will occur within the forwarded-to station's tens group of stations, and not the initially dialed station's
tens group of stations.
4. Step Call can not be initiated on Direct Inward Dial and Direct Inward Termination calls, but can be initiated
on Direct Inward System Access (DISA) calls.