Filter
Top Products
DIAL BY NAME
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 134
NDA-24271, Issue 1.0
5. Originating a Call
a. To originate calls after searching, press either TRK key, Line key (My Line/Sub Line) or Speaker
key, or off hook.
b. When the user originates call pressing TRK key, registered trunk access code is ignored. When the
user originates call pressing Line key or Speaker key, or going off hook, trunk access code registered
can be processed and appropriate trunk is selected.
c. When the user originates call after searching, the number is registered into the stack dial and Save &
Repeat.
6. Name Indication
a. A name is displayed on Multiline Terminal when a call is originated by Speed Calling-System with
the following operation.
• Speed Calling-System originated with Access code and Speed Calling number.
• Speed Calling-System originated with off-hook, press System Speed Dialing button and Speed
Calling number.
b. A name is displayed on Multiline Terminal when a call is originated by Speed Calling-Station with
the following operation.
• Speed Calling-Station originated with Access code and Speed Calling number.
• Speed Calling-Station originated with off-hook, press Station Speed Dialing button (F0064) and
Speed Calling number.
• Speed Calling-Station originated with Station Speed Dialing button (F11XX).
• Speed Calling-Station originated with Redial key and Speed Calling number.
c. A name is displayed on Multiline Terminal when Multiline Terminal user verifies the registered
Speed Calling number with the following operation:
• Dial Speed Calling Access code and Speed Calling number
• Press Station Speed Dialing button (F0065) and Speed Calling number
• Press Feature key, Station and Speed Dialing button (F11XX)
• Press Feature key, Recall Button, and dial Speed Calling number
d. A name is displayed when Multiline Terminal user originates a call by Speed Calling-One Touch.
e. A name is displayed when Multiline Terminal user verifies the registered Speed Calling number with
Feature key and One Touch Button.
f. When outgoing call encountered all trunk busy status and Route Advance (CM71/72) is activated, the
name is displayed on Multiline Terminal LCD.
g. A name is displayed when Multiline terminal user originates a call with Hot Line.
h. The Name Display/Guest Name are prior to name registered, in a station to station call made by
Speed Calling-One Touch key.
i. A name is displayed for about 6 seconds on Multiline Terminal LCD when Multiline Terminal user
originates a call by Speed Calling-System/Station/One Touch key.