Filter
Top Products
MISCELLANEOUS TRUNK ACCESS
Radio Paging Equipment Access
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 227
2. Care should be excerised in system data assignment when using this feature in conjunction with Least Cost
Routing (LCR) since FX lines may require that the digit 1 be dialed prior to the desired number, or that the
area code be deleted.
3. The maximum capacity of all trunk, including FX lines, cannot exceed 256 lines.
4. Access to this feature can be allowed or denied in Class of Service assignment.
5. FX lines can be assigned as Direct In Terminations.
Radio Paging Equipment Access
General Description
This feature provides station users dial access to Radio Paging Equipment, and to selectively tone - or voice/
tone-alert individuals carrying pocket paging devices. The paged party (when on premises) can be connected
to the paging party by going to the nearest station and dialing an answer back code.
Station Application
All stations.
Operating Procedure
To page
1. Go off hook and receive dial tone.
2. Dial the Radio Paging Answer Code and receive feature dial tone.
3. Dial the number of the paged radio and receive ring back tone.
4. The on premises paged party answers. The two parties can converse.
Service Conditions
1. Radio Paging Equipment must be locally provided. Refer to the manufacturer's documentation for the fol-
lowing specifications:
• type of tones
• capability of receiving individual radio number
• maximum number of users that can be assigned individual radio access numbers
2. A maximum of three digits can be assigned as Radio Paging Equipment Access and answer codes.
3. Individual radio numbers can be a maximum of 4 digits.
4. The Attendant Console can originate a radio paging call.
5. The maximum number of radio paging answer zones is 9.
6. The maximum number of trunk routes that can be assigned radio paging is 9.
7. If the paged party does not answer within 300 seconds, the on-premises paging-answer capability will be
cancelled. This timing is programmable up to 900 seconds (15 minutes).
8. Access to this feature can be allowed or denied in Class of Service Assignment.