CALL FORWARDING
Split Call Forwarding – No Answer
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 89
From a Single Line Telephone and Multiline Terminal without Split Call Forwarding – Busy Line feature key
• To set Split Call Forwarding – Busy Line
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding – Busy Line feature access code and receive feature dial tone.
3. Dial destination number (0-9) and receive service set tone.
4. Replace the handset.
• To cancel Split Call Forwarding – Busy Line
1. Lift the handset and receive dial tone.
2. Dial Call Forwarding – Busy Line cancellation code and receive service set tone.
Service Conditions
1. This feature allows a station to set the two kinds of call forwarded stations. One is the target station assigned
for Call Forwarding – Busy Line, the other is the target station assigned for Split Call Forwarding – Busy
Line. The target stations for Split Call Forwarding are assigned in system programming.
2. Either Call Forwarding – Busy Line or Split Call Forwarding – Busy Line can be selected for the feature
available per tenant in system programming, depending on the type of the incoming call which is an internal
call/attendant assisted call, a Tie Line call, or a C.O. call.
3. Split Call Forwarding – Busy Line allows any incoming Direct Inward Dialing (DID), Direct Inward Ter-
mination (DIT), Tie Line, Transfer, and internal calls which encounter a busy condition to be forwarded to
a predetermined location (Attendant Console, another station, or voice mail equipment).
4. Split Call Forwarding – Busy Line and Split Call Forwarding – No Answer must be set to the same desti-
nation to result in Split Call Forwarding – Busy Line/No Answer.
Split Call Forwarding – No Answer
General Description
This feature allows internal and external calls, to extensions that do not answer, to be rerouted to separate des-
tinations individually.
Number Destination
0 Target station for Split Call Forwarding – Busy Line (Block 0)
1 Target station for Split Call Forwarding – Busy Line (Block 1)
2 Target station for Split Call Forwarding – Busy Line (Block 2)
3 Target station for Split Call Forwarding – Busy Line (Block 3)
4 Target station for Split Call Forwarding – Busy Line (Block 4)
5 Target station for Split Call Forwarding – Busy Line (Block 5)
6 Target station for Split Call Forwarding – Busy Line (Block 6)
7 Target station for Split Call Forwarding – Busy Line (Block 7)
8 Target station for Call Forwarding – Busy Line
9 Station Speed Dialing