Filter
Top Products
SET RELOCATION
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 284
NDA-24271, Issue 1.0
SET RELOCATION
General Description
This feature enables two stations to be moved from one location to another without reprogramming station data
at MAT.
Station Application
From Multiline Terminal to Multiline Terminal.
From Single Line Terminal to Single Line Terminal.
Operating Procedure
To move Station A to Station B:
1. Lift handset at Station A; receive Dial Tone.
2. Dial Authorization Code access code; receive Special Dial Tone.
3. Dial Authorization Code for changing station class temporarily; receive Dial Tone.
4. Dial Set Relocation access code; receive Special Dial Tone.
5. Dial Station B number; receive Service Set Tone and LCD displays
SWAP OK xxxx
(where
xxxx
is
Station B number).
6. Restore the handset; After four seconds, data between Station A and Station B will be exchanged.
Service Conditions
1. This feature can move Multiline Terminal to Multiline Terminal, or Single Line Terminal to Single Line
Terminal.
The following cases are not available:
• Single Line Terminal
↔
Multiline Terminal
• PS
↔
PS/Single Line Terminal/Multiline Terminal
However, the following cases are available:
Note
• Single Line Terminal (DP)
↔
Single Line Terminal (PB)
• Between Multiline Terminals with different line button number
Note:
In this case, telephone sets also should be changed.
2. When the station has the following features, it cannot be moved:
• Single Line Terminal equipped with DSSCON
• Multiline Terminal equipped with Add-On-Module
• Multiline Terminal equipped with APR
• Multiline Terminal equipped with Dual Path
In this case, when dial Set Relocation access code, receive restrict ROT.
3. The following services cannot be moved:
• Stack Dial
• Last Number Redial
• Save and Repeat