PRIVATE LINES
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 251
PRIVATE LINES
General Description
Only a C.O. trunk assigned to that specific station is seized when a station user originates an outgoing C.O. call
or when an incoming C.O. call is terminated at the station designated by Direct-In-Termination. In this manner,
stations and C.O. trunks are to be associated on a 1-to-1 basis.
Station Application
All Multiline Terminals and Single line Telephones.
Operating Procedure
No manual operation is required.
Service Conditions
1. Incoming and outgoing restriction assignments can be used to assure privacy.
2. The following features are available:
• Conference
• Delayed Ringing
• Station Message Detail Recording (SMDR)
• Call Transfer
• Call Park
• Call Hold
• Save and Repeat
• Last Number Redial
• Broker's Call
• Station Speed Dialing using feature keys
3. When an outgoing call is placed, System Speed Dialing cannot be used.
4. The LED associated with the line key will be lit red when the trunk is busy, and green when being used by
the station that selected that trunk.
5. For further information, refer to the Flexible Line Key Assignment, Flexible Ringing Assignment, and
Trunk - Direct Appearance features.
6. This feature is valid for outgoing calls from a Single line Telephone or Multiline Terminal.
7. For an outgoing call, multiple trunks can be designated per station so that one specific trunk can be selected
out of them for seizure.
8. The following are valid methods for making an outgoing call from a Private Line:
• Dialing the C.O. trunk access code
• Station/System Speed Dialing
• Least Cost Routing
• Trunk Direct Appearance on a Multiline Terminal
• Last Number Redial
9. Private Lines are not available when using Trunk Queuing-Outgoing and Timed Queue.