Filter
Top Products
CONFERENCE (SIX/TEN PARTY)
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 122
NDA-24271, Issue 1.0
6. The maximum number of C.O. line/tie lines that can be connected in a Conference is:
• Up to five C.O. line/tie lines for a 6-party Conference
• Up to nine C.O. line/tie lines for a 10-party Conference
7. Call charges for C.O. lines are charged to the leader (in SMDR).
8. Ten ports are required per CFT trunk.
9. The CFT time out until the first participant is connected into the CFT trunk after seizing the CFT trunk is
fixed at 1 minute.
10. Amplification is provided for Conferences.
11. When a conference using the access code and a conference using the feature key are held simultaneously in
a system, the LED of the Conference feature key is not controlled.
12. A Multiline Terminal user can not use both 6-party and 10-party Conference feature keys simultaneously.
13. The LED indication of Conference feature key is as follows:
LED indication
STATUS
OFF: CFT trunk is not used.
Flash Red (60 IPM): CFT trunk is used. The leader is not attending by Hold key.
Steady Red: CFT trunk is used. The leader is not attending by going on hook.
Steady Green: Conference is established.
14. A participant can replace a conference leader by pressing the Conference feature key of their Multiline Ter-
minal. If the kind of Conference key (6-party or 10-party) is different from that of the leader, replace is not
allowed. Call charges for C.O. lines are charged to the first leader (in SMDR).