Filter
Top Products
PRIVATE LINES
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 252
NDA-24271, Issue 1.0
10. If a station uses a direct trunk line appearance on a Multiline Terminal for an OG calling, the call is origi-
nated from the C.O. trunk corresponding to the key pressed.
11. Only C.O. (loop-start and ground-start) trunks and Tie Line trunks can be assigned as private lines.
12. If the designated trunk is busy, the system is able to hunt to the next trunk (following increasing trunk num-
ber order). When the route number of the trunk differs from the route number of the original designated
trunk, hunting stops and the caller receives busy tone.
13. If a station uses a secondary extension on a Multiline Terminal for an OG calling, the designated trunk for
the primary extension of that station is seized.
14. A designated trunk can not be seized unless the route of the trunk access code is the same as the route of
that trunk.
15. In the case of an outgoing call from an Attendant Console or a tandem call, a trunk is seized normally, irre-
spective of this feature.
16. An Account Code may be entered using a function key programmed for Account Code entry or Account
Code can be dialed on second dial tone.