Filter
Top Products
INTERCOM
Automatic Intercom
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 195
Automatic Intercom
General Description
Automatic Intercom provides a path for Voice Announcement Calls with Handsfree Answerback between two
Multiline Terminals using a line key. Private conversations can be held by using the Multiline Terminal hand-
sets. The Busy/Idle status of the associated Multiline Terminal is displayed on the Automatic Intercom line key
LED.
Station Application
All Multiline Terminals.
Operating Procedure
1. The caller lifts the handset and presses the Automatic Intercom key.
2. The called terminal receives a tone burst followed by Voice Announcement and can answer using Handsfree
Answerback.
OR
1. The caller can change the call to a ringing call by dialing 1.
2. The called terminal must press Automatic Intercom key and lift the handset to answer ringing call.
Service Conditions
1. Only two Multiline Terminals can share an Automatic Intercom path.
2. The maximum number of Automatic Intercom paired stations per system is 32.
3. More than one Automatic Intercom can appear on a Multiline Terminal.
4. Automatic Intercoms are private.
5. Each Automatic Intercom pair uses two extensions which can be software extensions (no supporting hard-
ware is required).
6. Dual Hold with hold recall is available on Automatic Intercom. Other extension features such as Call Trans-
fer, Call Park, etc. are not available.
7. When the called terminal is busy, the caller will receive busy tone.
Dial Intercom
General Description
Dial Intercom comprises up to 10 Multiline Terminals which can call each other using a dedicated Dial Intercom
line key with abbreviated dialing. Dial Intercom calls can be Voice Announce with Handsfree Answerback or
ringing calls.
Station Application
All Multiline Terminals.