Filter
Top Products
PRIVACY
Manual Privacy Release
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 250
NDA-24271, Issue 1.0
4. The ability to access a busy extension that is making an outside (trunk) call prior to being answered is de-
pendent on proper setting of the maximum digit dialed assignment (Command 85).
5. This feature is denied on an extension that has been placed on Call Hold by another extension or has placed
another party on Call Hold.
Manual Privacy Release
General Description
This feature allows a Multiline Terminal user to enter a conversation on a busy line button if the Multiline Ter-
minal user already in the conversation allows them by releasing Privacy.
Station Application
All Multiline Terminals.
Operating Procedure
To activate Privacy Release with a call in progress:
1. Press the Conf key. The Conf LED flashes.
2. Another station with the same line appearance presses that line button.
3. Privacy on that line is released and a three-party Conference is in progress.
4. Repeat above procedure to establish a four-party Conference, if desired.
Service Conditions
1. When a line is busy and Manual Privacy Release has not been activated on that line, any attempt to access
that line will result in busy tone.
2. Manual Privacy Release is available for Multiline Terminals connected to any extension line key.
3. When a Multiline Terminal user presses the Conf key, Privacy on the active line is released. If the Conf key
is pressed again or another party enters the connection, Privacy is reestablished.
4. After a third party enters the conversation, the Conf key can be pressed again. Privacy is released and a
fourth party is allowed to join the conversation by the same operating procedure.
5. Manual Privacy Release is activated only on a connection during which the Conf key is pressed. Once the
station releases the connection, Manual Privacy Release is canceled and Privacy is restored.
6. The primary extension of the station entering the conversation is accessed when that station enters the con-
versation. For this reason, the primary extension must be idle at the entering station for this feature to work.