Filter
Top Products
DIRECT INWARD DIALING (DID)
DID Call Waiting
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 142
NDA-24271, Issue 1.0
DID Call Waiting
General Description
This feature allows an incoming call on a DID trunk or a tie line to automatically be Camped-On to the desti-
nation station if the destination station is busy.
Station Application
All stations.
Operating Procedure
The camp-on occurs automatically once this feature is assigned. For details on how to respond to the camp-on,
refer to the Camp-On Features and Specifications.
Service Conditions
1. This feature is assigned on a per trunk route basis and on the basis of which number is dialed into the DID/
tie trunk.
2. The outside party receives ringback tone while waiting for the station to answer the Camp-On.
3. Refer to the Camp-On Features and Specifications for more information and service conditions related to
Camp-On.
DID Digit Conversion
General Description
This feature allows the system to convert the digits received from the serving C.O. to valid station numbers when
the C.O. numbering plan differs from the desired station numbering plan.
Station Application
Not Applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. Addition and deletion of digits can be implemented to coincide with the existing numbering plan.
2. When digit conversion of DID incoming LDN has been activated, the number received from the C.O. before
conversion is displayed.
3. A DID incoming LDN can be converted to a PBX station number, by analyzing the upper two-four digits
of DID incoming LDN. A maximum of 10,000 DID incoming LDN can be converted to a maximum of
1,000 PBX station numbers.
• MP without expansion memory (standard) :up to 500 station numbers
• MP with expansion memory (optional) :up to 1,000 station numbers