Filter
Top Products
ATTENDANT CONSOLE
Attendant Called/Calling Name Display
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 21
Service Conditions
1. Each Firmware Processor (FP) can support up to 8 Attendant Consoles (SN610 ATTCON/SN716
DESKCON). A maximum of 8 Attendant Consoles (SN610 ATTCON/SN716 DESKCON) can be support-
ed per system.
2. Each SN716 DESKCON uses a 3-pair cable. This cable cannot be longer than 4000 feet (1200 meters).
3. The SN716 DESKCON is equipped with an Alarm LED. This LED will flash for Minor Alarms and light
steadily for Major Alarms. Refer to Maintenance Administration Terminal, Fault Messages for more infor-
mation. Refer to the following chart for cable distances.
4. Refer to the following chart for cable distances:
Note:
The SN716 DESKCON uses the PW00 card mounted in the PBX, or the D
term
Series E AC/DC Adapter,
not both.
5. The SN716 DESKCON does not support the Lockout feature. Position Busy replaces the Lockout feature.
6. The system does not support Busy Lamp Field on the keypad.
7. The system does not support REC, EMG, TKSL, SVC, MODE key on the console.
8. The following key assignments are fixed and cannot be changed by system programming:
PAGE, BV, CALL PARK, SC, START, MUTE.
Attendant Called/Calling Name Display
General Description
This feature provides a display of the calling/called party's name on the Attendant Console LCD for Attendant
Called/Calling Name Display. On attendant-to-station calls, the LCD display the name assigned to the primary
extension of the station. On attendant-to-trunk calls, the LCD displays the name assigned to the trunk route of
the trunk.
Station Application
Attendant Console.
Operating Procedure
Displays are automatically provided by the system, once programmed.
Service Conditions
1. A maximum of 512 stations can be provided with a user's name display. The maximum number of characters
per name is 16 (including spaces). The Maintenance Administration Terminal (MAT) or Customer Admin-
istration Terminal (CAT) can be used to register or change a name. Multiline Terminal users can record or
change the name assignment for their own individual Multiline Terminal.
2. User names can be assigned to stations that do not have an LCD display (including Single Line Stations).
With PW00 With AC/DC Adapter
4 port DLC and 2 DLCC 1000 feet (304 meters) 4000 feet (1219 meters)
8 port DLC 1000 feet (304 meters) 1000 feet (304 meters)