Filter
Top Products
CALL FORWARDING
Call Forwarding – All Calls
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 75
• To cancel Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding All Calls feature access key and receive special dial tone. The LCD displays:
CF CALL XXXX
(Target Station)
3. Press the * key and receive service set tone. The LED of the associated feature key will go out. The LCD
displays CANCEL.
4. Replace the handset or press the Speaker key.
From a Single Line Telephone
• To set Call Forwarding – All Calls
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding – All Calls feature access code and receive feature dial tone.
3. Dial the desired target station number and receive service set tone.
• To set Call Forwarding – All Calls – Outside
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding – All Calls feature access code and receive feature dial tone.
3. Dial the trunk access code and desired telephone number.
4. Wait until service set tone is received, unless programming CM08-222=0.
5. Replace the handset.
• To monitor Call Forwarding - All Calls
1. Lift the handset.
2. When Call Forwarding - All Calls has been set, special dial tone is heard.
3. Replace the handset.
• To cancel Call Forwarding – All Calls
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding – All Calls cancellation code and receive service set tone.
Service Conditions
1. There is no limit to the number of stations that can set Call Forwarding – All Calls at one time.
2. Extensions can be allowed or disallowed this feature by Class of Service in system programming. A separate
Class of Service Assignment controls access to Call Forwarding – All Calls to outside numbers.
3. When Call Forwarding – All Calls is rerouted to another destination, one burst of ringing is sent to the for-
warded station to indicate that it is call forwarded (Single Line Telephone only).
4. When a call is forwarded to a Multiline Terminal with LCD, the display shows the initially called station's
number as well as the calling station's number.
5. Call Forwarding – All Calls assignments are retained in system memory when the system is re-initialized
or when there is a power failure.