Filter
Top Products
ALARM INDICATIONS
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 6
NDA-24271, Issue 1.0
2. Normal operation of each Firmware Processor (FP) is indicated by a green flashing (120 int) “run” LED
located on the FP.
3. Normal operation of the Main Processor (MP) is indicated by a green flashing (120 int) “run” LED located
on the MP.
4. Normal operation of each AC/DC power supply is indicated by a steadily lit green LED located on the AC/
DC power supply.
5. In case that PBX is stopped at predetermined time, when PBX starts, fault message is stored and alarm is
sent.
6. Alarm indication to Multiline Terminal lamp;
a. The maximum number of Multiline Terminals per system is two.
b. In case of MN alarm: Red flashing (60 int)
c. In case of MJ alarm: Red lighting (included MN + MJ)
d. When system/FP is reset after lighting alarm lamp, alarm indication will go off.
(Fault information remains.)