Filter
Top Products
PROPRIETARY MULTILINE TERMINAL
Prime Line Pickup
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 260
NDA-24271, Issue 1.0
Operating Procedure
With a call in progress using handset
1. The terminal receives an incoming extension call directed to the Primary Extension, and hears voice-page
alert tone.
2. Respond hands-free (when MIC LED is lit).
3. Press the Answer key to respond with the handset. The original call is automatically put on Non-exclusive
Hold.
To set Voice or Tone mode
1. Press the Speaker key.
2. Dial Voice/Tone Programming access code and receive feature dial tone. The LCD will show the current
mode of the Multiline Terminal.
3. Dial any single digit (0-9). Voice mode is switched to Tone mode, or vice versa, and Service Set Tone is
heard.
4. Press the Speaker key.
Service Conditions
1. This feature is assigned in Class of Service on a per-station basis.
2. This feature is only available for the incoming call to the Primary Extension of a Multiline Terminal with
an APR or APA unit.
3. The Multiline Terminal with APR or APA unit requires two time slots: one for primary voice, one for sec-
ondary voice. Therefore, the maximum number of Multiline Terminals with APR or APA units is limited
by the total number of time slots in the PIM or the system.
4. The voice announcement to a Multiline Terminal in DND is restricted.
5. The voice call on Automatic Intercom/Boss-Secretary Transfer is not affected by the mode programming
(Voice/Tone mode) of the called station.
Prime Line Pickup
General Description
This feature allows a Multiline Terminal user to go off hook and originate a call from the line assigned as the
Prime Line without pressing the associated line key.
Station Application
All Multiline Terminals.
Operating Procedure
1. Lift the handset or press the Speaker key.
2. Dial tone from the Prime Line is received.
3. Proceed with normal call processing.