Filter
Top Products
EXTERNAL PAGING WITH MEET-ME
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 167
Service Conditions
1. Amplifiers and speakers must be provided locally.
2. One trunk circuit from a COT card is required for each zone of external paging.
3. One PN-DK00 (or built-in DK00 in MP) is required for every four zones of external paging in order to share
a common amplifier and background music source.
4. The maximum length of paging access codes is three digits. Paging access codes and Meet-Me codes must
be preprogrammed.
5. A maximum of 10 zones of external paging can be set up.
6. Meet-Me service is programmable. When Meet-Me service is not provided, there is no system timeout on
paging. When Meet-Me service is provided, a system timeout is applied to the delay Meet-Me operation.
In the case of delay operation, both the paging period and the period of waiting for the Meet-Me call are
combined. After this timeout expires, Meet-Me attempts will be denied and the paging circuits become
available again. (Refer to the Variable Timing Parameters feature for timeout information).
7. If additional dialing is required after seizing a paging trunk, the Radio Paging Equipment Access feature
may be used.
8. No LED indication for the External Paging key on an Attendant Console is provided.