Filter
Top Products
INTERNAL ZONE PAGING WITH MEET-ME
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 199
INTERNAL ZONE PAGING WITH MEET-ME
General Description
This feature allows the Attendant Console and system users to page over the built-in speakers of the Multiline
Terminals within the assigned zone or all zones.
Station Application
All stations.
Operating Procedure
To page from a Multiline Terminal or a Single Line Telephone
1. Lift the handset and receive extension dial tone.
2. Dial the Internal Zone Paging feature access code for the desired zone/all zones or press line key assigned
for the desired zone/all zones.
3. Page the desired party.
To page from Attendant Console
1. Press an idle LOOP key.
2. Dial the Internal Zone Paging feature access code for the desired zone/all zones.
3. Page the desired party.
To answer (Meet-Me) from a Multiline Terminal or a Single Line Telephone
1. Lift the handset and receive extension dial tone.
2. Dial the Meet-Me Answer feature access code.
3. Converse.
Service Conditions
1. The maximum number of internal paging zones is 8, zone 0 through zone 7. Up to 8 Internal zones can be
accessed simultaneously by different stations.
2. The paging station can only page to one zone at a time. For all-zone paging, the paging station can page
Zone 0 through Zone 5 simultaneously.
3. The maximum number of Multiline Terminals within one zone is 16.
4. A busy Multiline Terminal will not be paged during an Internal Zone Page.
5. Multiline Terminals can be assigned to more than one zone.
6. Meet-Me Answer cannot be done after performing a consultation hold.
7. Any station can page any zone.
8. The paging station will not receive busy tone when all stations in the paged zone are busy.
9. For the following paging, a paged station must dial paging station number or attendant access code to an-
swer without Meet-Me Answer:
• Zone Paging by Attendant Console
• All Zone Paging by any station or attendant