NEC NEAX 2000 Recording Equipment User Manual


 
DO NOT DISTURB
Do Not Disturb - Hotel/Motel
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 158
NDA-24271, Issue 1.0
3. Press the RESET key.
4. The above two steps can be repeated for additional stations.
5. Press the RLS key.
To set Do Not Disturb to the station currently connected
1. Press the DD key.
2. Press the SET key.
3. Press the RLS key.
To cancel Do Not Disturb to the station currently connected
1. Press the DD key.
2. Press the RESET key.
3. Press the RLS key.
From a guest station or administrative station
To set Do Not Disturb
1. Go off-hook and receive dial tone.
2. Dial the Do Not Disturb setting code.
3. Receive service set tone and restore the handset.
To cancel Do Not Disturb
1. Go off-hook and receive dial tone.
2. Dial the Do Not Disturb cancellation code.
3. Receive service set tone and restore the handset.
Service Conditions
1. Automatic Wake Up and Timed Reminder will override Do Not Disturb.
2. A station in Do Not Disturb can be called from the Attendant Console or the Hotel/Motel Front Desk Instru-
ment using the DNDOVR key.
3. Do Not Disturb is automatically cleared when Check Out is performed.
4. Depending on system programming, an incoming call addressed to a station in DND condition is routed to
one of the following on a per-tenant basis:
Reorder tone
Attendant Console
A predesignated station
5. Refer to Attendant Console and Hotel/Motel Front Desk Instrument Features and Specifications for addi-
tional information on Do Not Disturb.
6. When a member station within a Station Hunting group is in DND, calls will bypass the member station and
continue hunting. A pilot station in DND places the Hunt group in DND.
7. Call Forwarding - Busy settings by stations in DND will result in calls being forwarded, even if the stations
are idle.
8. Message Waiting and Message Reminder can not be set to stations in DND during conversation.