Filter
Top Products
ANALOG PORT ADAPTER
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 9
ANALOG PORT ADAPTER
General Description
This feature allows an Analog Port Adapter unit combined with a Multiline Terminal to connect to an analog
terminal such as an analog telephone, Modem, and PC with built-in Modem.
There are two communication modes for the terminal connected via the Analog Port Adapter as shown below:
1. Single Port Mode
A Multiline Terminal and an analog terminal share the same port. In this mode, the Multiline Terminal and
the analog terminal cannot be used simultaneously.
2. Dual Port Mode
A Multiline Terminal and an analog terminal use different ports. In this mode, the Multiline Terminal and
the analog terminal can be used simultaneously.
Station Application
Multiline Terminals (D
term
Series III/Series E).
Operating Procedure
Single Port Mode
• To originate a call from an analog terminal without keypad via the Analog Port Adapter
1. Lift the handset of a Multiline Terminal and receive dial tone.
2. Dial the desired station number and receive ringback tone. The LED of the Prime Line on the Multiline Ter-
minal lights green.
3. After the called party answers, lift the handset of the analog terminal to switch over to the analog terminal.
4. Replace the handset of the Multiline Terminal.
5. Converse.
• To originate a call from a single line telephone (PB) via the Analog Port Adapter
1. Lift the handset of a single line telephone and receive dial tone. The LED of the Prime Line on the Multiline
Terminal lights green.
2. Dial the desired station number from the single line telephone and receive ringback tone.
3. The called party answers; converse.
• To answer an incoming call to the Prime Line from an analog terminal via the Analog Port Adapter
1. An analog terminal rings when a call terminates to the Prime Line on the Multiline Terminal.
2. Lift the handset of the analog terminal. The LED of the Prime Line on the Multiline Terminal lights green.
3. Converse.