Filter
Top Products
CALL FORWARDING
Call Forwarding – All Calls
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 74
NDA-24271, Issue 1.0
Service Conditions
The Attendant can cancel any type of Call Forwarding set by an internal station.
Call Forwarding – All Calls
General Description
This feature allows all calls directed to a particular extension to be rerouted to an alternate destination, regardless
of the busy or idle status of the extension. Call Forwarding – All Calls can be set by an Attendant Console, the
individual station user, a Multiline Terminal with a secondary appearance of the station's extension, or from an-
other station (which can program itself to be the destination of the rerouting).
Station Application
All stations.
Operating Procedure
From a Multiline Terminal with LCD
• To set Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding – All Calls feature access key and receive feature dial tone.
3. Dial the desired target station number and receive service set tone. The associated LED lights and the LCD
displays:
SET XXXX or SET OPR
(Target Station) (Operator)
4. Replace the handset or press the Speaker key.
• To set Call Forwarding – All Calls – Outside
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding – All Calls feature access key and receive feature dial tone.
3. Dial the trunk access code and the desired telephone number.
4. Wait till service set tone is received, unless programming CM08-222=0.
5. Replace the handset or press the Speaker key.
• To monitor Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone or special dial tone (when lifting the handset).
2. Press the Call Forwarding – All Calls feature access key. The LCD displays:
CF CALL XXXX
(Target Station)
3. Replace the handset or press the Speaker key.