Filter
Top Products
GROUP CALL
2 Way Calling
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 175
Up to four CFT trunks can be accommodated in the system.
The maximum number of conference groups per system when using four CFT trunks (maximum) is:
• Four, 6-party conference groups
• Two, 10-party conference groups
• Two, 6-party conference groups and one, 10-party conference group
A CFT trunk is used for either a 6-party or 10-party conference. Dialed access codes determine which CFT
trunk is used for a conference. If the leader dials the access code or press the feature access key for a 10-
party conference when only one CFT trunk is idle, the leader is restricted and hear reorder tone.
5. A Single Line Telephone, Multiline Terminal, can be an originator and make a conference call to a group,
even if it does not belong to the group.
6. A Single Line Telephone, Multiline Terminal, which does not belong to the group, can be a participant of a
conference by dialing the re-participation access code or by pressing the feature access key(Multiline Ter-
minal only), when the CFT trunk has an idle circuit.
7. An originator cannot page two or more groups simultaneously.
A group cannot be paged simultaneously by the multiple originators.
A group cannot be paged while a conference of the group is in progress.
8. If all stations within the paged group are busy, the originator hears the reorder tone.
If a station does not answer the paging by certain time (whichi is determined by the system data), the orig-
inator leader hears the busy tone.
9. When a station cannot answer the paging by paging time out, or busy state , the station can participate the
conference by dialing the re-participation access code or by pressing the feature access key while the con-
ference is in progress.
10. If the originator leaves the conference, the originator can re-participate by dialing the re-participation access
code or by pressing the feature access key while the conference is in progress.
11. A station can be paged in the idle state. When the station is busy at the time of paging, the station cannot be
paged even if the station returns to idle afterward.
12. Even if a station sets Call Forwarding, the originator can page the station.
2 Way Calling
General Description
This feature allows a Multiline Terminal/Single Line Telephone to page a maximum of fifteen parties simulta-
neously including the originator. After one of paged parties answers, the paging becomes the 2 Way Calling be-
tween the originator and the first answered party, automatically stops paging other parties. The stations are
assigned to the simultaneous paging groups as a participants by the system data beforehand.
Station Application
All Stations.