Filter
Top Products
SAVE AND REPEAT
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 282
NDA-24271, Issue 1.0
SAVE AND REPEAT
General Description
This feature allows a Multiline Terminal to save a specific dialed number and then redial that number at a later
time.
Station Application
All Multiline Terminals.
Operating Procedure
1. Go off-hook and seize any idle line. Dial a number.
2. After the number has been dialed, press the Save and Repeat key. The dialed number is stored for future use.
The associated LED lights red.
3. To access this number later, go off-hook and receive dial tone. Press the Save and Repeat key and the saved
number is dialed.
Service Conditions
1. Three Save and Repeat keys per station can be assigned.
2. The Save and Repeat function may be set at any time after the number has been dialed and before going on-
hook.
3. It is not necessary to erase the stored number in order to save another. The second number will automatically
replace the first.
4. If necessary, dialing can be added after pressing the Save and Repeat key.
5. When a call is originated using the Save and Repeat feature, the LED associated with the Save and Repeat
key goes out. However, the memory is retained and that number can be accessed again.
6. To monitor the saved digits, press the Save and Repeat key while the station is idle. The saved digits will
be displayed if the Multiline Terminal is equipped with an LCD.
7. The trunk access code is saved along with the dialed number on a Trunk Direct Appearance. This allows
use of the Save and Repeat key on an extension.
8. The maximum number of digits that can be stored is 26.