Filter
Top Products
MESSAGE WAITING
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 219
• To cancel Message Waiting while receiving ringback tone or busy tone
1. Press the MW key.
2. Press the RESET key.
3. Press the RELEASE key.
From the Attendant Console
• To set Message Waiting
1. Dial the desired station number.
2. Press the MW key.
3. Press the START key.
4. Press the RELEASE key.
• To cancel Message Waiting
1. Dial the desired station number.
2. Press the MW key.
3. Press the RESET key.
4. Press the RELEASE key.
From an administrative station
• To set Message Waiting
1. Lift the handset and receive dial tone.
2. Dial the Message Waiting set access code.
3. Dial the desired station number and receive service set tone.
4. Restore the handset.
• To cancel Message Waiting
1. Lift the handset and receive dial tone.
2. Dial Message Waiting reset access code.
3. Dial the desired station number and receive service set tone.
4. Restore the handset.
Note:
Property Management System (PMS) procedures will vary, depending on the locally provided PMS.
Voice Message Waiting - System
• To record
1. Lift the handset and receive dial tone.
2. Dial the Voice Message - System record access code.
3. Dial the message number (0-9) and receive service set tone for 3 seconds.
4. Record the message.
5. Restore the handset.