Filter
Top Products
DO NOT DISTURB
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 156
NDA-24271, Issue 1.0
3. Press the START key. The DD LED lights steady and service set tone is received.
4. Press the RELEASE key.
• To cancel an individual station in DND
1. Dial the desired station number.
2. Press the DD key and the associated LED flashes.
3. Press the RESET key and the DD LED goes out.
4. Press the RELEASE key.
• To set a group of stations in DND
1. Press the DD key and the associated LED flashes.
2. Press the START key and the DD LED lights steady.
3. The designated group is now in DND.
• To cancel a group of stations in DND
1. Press the DD key and the associated LED flashes.
2. Press the RESET key and the DD LED goes out.
3. The designated group is no longer in DND.
• To call a station that set DND (Attendant Only)
1. Press an idle LOOP key.
2. Dial the station number and the DD LED flashes and reorder tone is received.
3. Press the DDOVR key.
4. The station will ring.
Service Conditions
1. Calls to stations that are in Do Not Disturb will receive reorder tone or on a tenant basis, can be assigned to
transfer to the Attendant or a predesignated station.
2. The station in Do Not Disturb can originate calls in the normal manner.
3. Call Forwarding can be set to a station in Do Not Disturb.
4. A Do Not Disturb station will be omitted from the Station Hunting chain. If a DIT call is directed to a pilot
of a hunt group, hunting will be provided. Internal calls will receive a fast busy tone.
5. The Do Not Disturb station can cancel DND even though the condition was set by the Attendant.
6. Verification of stations in Do Not Disturb is only possible from the Attendant Console. Multiline Terminals
with LCD and a DND key assigned can verify their own DND setting.
7. The ability to set DND can be controlled on a per station via Class of Service or a per system basis.
8. This feature can only be set or canceled by the station while the station is receiving internal dial tone.
9. When a Multiline Terminal is set in DND, calls to the primary extension and secondary extensions will not
ring. Trunks programmed to ring will not do so while DND is set, but flashing LED indications are still
provided. DND will not deny an Executive Override.
10. Only the Attendant has the ability to place a group of stations in Do Not Disturb. There is only one group
available and the stations within the group are programmed in system data. There is no limitation on the
number of stations in the group.