Filter
Top Products
CAMP-ON
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 110
NDA-24271, Issue 1.0
8. Periodic Camp-On tone can be provided every 4 seconds. This can be allowed or denied in system program-
ming on a per-system basis. When denied, a single Camp-On signal is received.
9. Camp-On can only be set if the called station is on a two-party call. Camp-On is denied if the busy station
is dialing or in Line Lockout, receiving a system generated tone, protected against any override by DND
key, a Data Station currently has a Camped-On call or if any of the following features are activated on the
busy station:
• Attendant Override • Conference • Executive Override
• Attendant Camp-On • Consultation Hold • Privacy
• Call Hold (by key) • Data Line Security • Voice Call
• Call Transfer
10. When Camp-On is denied, the caller will receive reorder tone and can return to the original party (in the
case of a Camp-On transfer).
11. When single digit access codes are enabled, Multline Terminal users can set a Camp-On without using the
Transfer key twice.
12. Camp-On (call waiting) for outside calls (DID, CCIS incoming calls) can be allowed or denied on a per-
trunk route basis or per-DID number basis.
13. When the called station is a pilot station in a Hunt group or UCD group, Hunting or UCD queuing is fol-
lowed. If all stations in the Hunt group are busy, the called station is camped on.
14. When the called station has set Call Forwarding-All Calls and the forwarding destination is busy, the for-
warding destination is camped on.
15. When the called station has set Call Forwarding-Busy Line and the forwarding destination is busy, the orig-
inally called station is camped on.