Filter
Top Products
CALL PARK
Call Park - System
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 94
NDA-24271, Issue 1.0
4. Dial the Call Park location number (00-19) and receive service set tone. (If Call Park-System number is
busy, dial another location number using the Step Call feature until an idle park location is accessed.)
5. Restore the handset.
• From an Attendant Console
1. Dial Call Park-System feature access code. The first available Call Park location is selected by the system
and displayed in the LCD. Receive service set tone.
2. Press the RELEASE Key.
To retrieve a call from Call Park-System
• From a Single Line Telephone
1. From any station, go off hook and receive internal dial tone.
2. Dial the Call Park-System retrieval access code.
3. Dial the Call Park-System location number (00-19).
4. Converse.
• From a Multiline Terminal with a Trunk Direct Appearance
1. Go off hook and receive dial tone.
2. Press Trunk Direct Appearance feature key flashing.
• From an Attendant Console
1. Press LOOP key.
2. Dial the Call Park-System feature access code or press the Call Park-System feature key.
3. Dial the Call Park-System location number (00-19).
4. Converse.
Service Conditions
1. A station user can originate and receive calls while having a call in Call Park-System.
2. A maximum of 20 simultaneous calls can be parked within a system. A station user can place multiple calls
into Call Park-System provided the maximum number is not exceeded.
3. Any internal or external call can be placed into Call Park-System.
4. Any call left on Call Park-System for more than a preprogrammed time interval will recall to the primary
extension of the station which originally parked the call. Once this recall has started, the Call Park-System
location becomes idle. When Call Park-System recalls, the parked party hears ringback tone.
5. If the trunk which was placed in Call Park is assigned to any Multiline Terminal as a direct trunk appearance,
the system can be programmed on a per system basis whether or not the Multiline Terminal can retrieve the
parked call by pressing the Trunk key. Trunk key LED indication is as follows:
• Possible to retrieve:flashing Green/Red (hold)
• Impossible to retrieve:steady Red (busy)
6. When a Call Park-System recalls to a station, any other station can pick it up using Call Pickup - Direct, Call
Pickup - Group or Call Pickup - Designated Group.
7. When attempting to set Call Park-System to a busy Call Park-System location, Step Call can be used to ac-
cess an idle location.