Filter
Top Products
FAX ARRIVAL INDICATOR
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 168
NDA-24271, Issue 1.0
FAX ARRIVAL INDICATOR
General Description
When a call from a C.O. line (Direct-Inward-Termination, Direct-Inward-Dialing, Automated Attendant), sta-
tion or tie line has terminated to a facsimile machine, a related lamp on a predesignated Multiline Terminal is
caused to light, indicating reception of a facsimile call. The lamp indication is as follows:
Station Application
All Multiline Terminals.
Operating Procedure
To turn off the facsimile call lamp, press the FACSIMILE INCOMING CALL key.
Service Conditions
Note:
In the following service conditions, the term facsimile station refers to the actual facsimile machine sin-
gle line station number. Facsimile call station refers to the button assignment on the Multiline Terminal.
1. The number of facsimile station numbers and facsimile call station numbers that can be assigned varies with
each of the following cases.
a. When Hot Lines-Inside/Outside are used to implement this feature, a maximum of 100 facsimile
stations can be assigned. In addition, a maximum of 100 facsimile call stations can be assigned.
b. When House Phone groups are used to implement this feature, a maximum of four facsimile stations
can be assigned. In addition, there is no limit to the number of facsimile call stations that can be
assigned to each facsimile station.
2. Termination of a facsimile call is indicated on the lamp of the flexible line key to which a facsimile call
station number is assigned.
3. This feature does not indicate a call termination on the LCD.
4. One facsimile call number can be assigned to flexible line keys of multiple Multiline Terminal sets.
5. Multiple facsimile call numbers can be assigned to a flexible line key of any one specific Multiline Terminal
set.
6. When a new call terminates while the facsimile incoming call lamp is lit, the lamp indication changes to
120-ipm flash.
7. The chime which signals starting reception of a facsimile message beeps even if the Multiline Terminal is
busy, unless the speaker is in use at that time.
Status Indication
Receiving
Lamp (red); 120-ipm flash
(The chime beeps on start of message reception)
Receive End Lamp (red); Steady Lighting
Not Receiving/Clear Lamp Off