Filter
Top Products
ANALOG PORT ADAPTER
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 10
NDA-24271, Issue 1.0
• To answer an incoming call to the secondary extension from an analog terminal via the Analog Port Adapter
1. An analog terminal does not ring when a call terminates the secondary extension on the Multiline Terminal.
2. Press the line key of the secondary extension on the Multiline Terminal and lift the handset of the Multiline
Terminal. The LED of the secondary extension on the Multiline Terminal lights green.
3. Lift the handset of the analog terminal to switch over to the analog terminal.
4. Replace the handset of the Multiline Terminal.
5. Converse.
Dual Port Mode
An analog terminal connected via the Analog Port Adapter can be used independently of the Multiline Terminal.
Refer to the User's Guide for each terminal for operating procedures.
Service Conditions
1. The following analog terminal can be connected to the APR unit:
• Single Port Mode: Single Line Telephone (PB only), Facsimile, Modem for PC Dialing Connection
Unit
• Dual Port Mode: Single Line Telephone (PB only), Facsimile, Voice Mail System with analog inter-
face, Modem with NCU
2. In Single Port Mode, the Multiline Terminal and the analog terminal cannot be used simultaneously. When
the Multiline Terminal and the analog terminal go off hook simultaneously, the analog terminal has prece-
dence.
3. In Dual Port Mode, the Multiline Terminal and the analog terminal can be used simultaneously.
4. A Multiline terminal/analog terminal cannot be identified on the LED in Single Port Mode. The LED indi-
cation on the Multiline Terminal when the analog terminal is in use is as follows:
• Single Port Mode: The LED of the Prime Line lights green.
Note
• Dual Port Mode: The LED of the secondary extension lights red.
Note:
When answering the incoming call to the secondary extension on the Multiline Terminal and switching
over to the analog terminal, the LED of the secondary extension lights green.
5. A Multiline Terminal/analog terminal cannot be identified on the LCD on the Multiline Terminal in Single/
Dual Port Mode.
6. The ringing pattern is fixed as 1 sec. ON - 2 sec. OFF. The distinctive ringing pattern cannot be provided
for Single/Dual Port Mode.
7. The service feature with hooking operation is not allowed from the analog terminal for Single/Dual Port
Mode.
8. In Dual Port Mode, the analog terminal cannot originate from the secondary extension and cannot answer
the incoming call to the secondary extension.
9. In Dual Port Mode, a call cannot be switched over from the Multiline Terminal to the analog terminal, or
vice versa.