CALL FORWARDING
Split Call Forwarding – All Calls
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
Page 86
NDA-24271, Issue 1.0
From a Multiline Terminal with LCD
• To set split Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Split Call Forwarding – All Calls feature access key and receive feature dial tone.
3. Dial the desired destination number (0-9) and receive service set tone.
The associated LED lights and the LCD displays:
SET XXXX or SET OPR
(Target Station) (Operator)
The LED of the associated feature button lights.
4. Replace the handset or press the Speaker key.
• To monitor Split Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone or special dial tone (when lifting the handset).
2. Press the Split Call Forwarding – All Calls feature access key.
The LCD displays:
CF ALL XXXX (Target station)
3. Replace the handset or press the Speaker key.
• To cancel Split Call Forwarding – All Calls
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Split Call Forwarding – All Calls feature access key and receive special dial tone.
The LCD displays:
CF ALL XXXX (Target station)
3. Press the * key and receive service set tone. The LCD displays CANCEL and the associated LED goes off.
4. Restore the handset or press the Speaker key.
Number Destination
0 Target station for Split Call Forwarding – All Calls (Block 0)
1 Target station for Split Call Forwarding – All Calls (Block 1)
2 Target station for Split Call Forwarding – All Calls (Block 2)
3 Target station for Split Call Forwarding – All Calls (Block 3)
4 Target station for Split Call Forwarding – All Calls (Block 4)
5 Target station for Split Call Forwarding – All Calls (Block 5)
6 Target station for Split Call Forwarding – All Calls (Block 6)
7 Target station for Split Call Forwarding – All Calls (Block 7)
8 Target station for Call Forwarding – All Calls
9 Station Speed Dialing