Filter
Top Products
FLEXIBLE NUMBERING PLAN
NEAX2000 IVS
2
Business/Hotel/Data Features and Specifications
NDA-24271, Issue 1.0
Page 171
FLEXIBLE NUMBERING PLAN
General Description
The system has a Flexible Numbering Plan. All access codes and station numbers and can be assigned in system
programming. Refer also to the Single Digit Dialing Features and Specifications which further increases the
flexibility of the system.
Station Application
All stations.
Operating Procedure
Normal call handling procedures apply.
Service Conditions
1. The system is provided with a Resident System Program; however, the flexibility of the system allows all
access codes and station numbers to be changed to any desired number (from one to three digits for access
codes, and one to 8 digits for station numbers), provided access codes and station numbers do not conflict
with each other.
2. Up to four different numbering plans may be assigned in the same system. When there are multiple tenants,
any one of the four numbering plans can be assigned to each tenant.
3. Any combination of 1 to 8 digits can be assigned as station numbers within the same numbering plan. When
assigning different amounts of digits to stations the leading digits of the shorter extension numbers cannot
be the same as the leading digits of the longer extension numbers. For example: extensions 60 and 607 can-
not be assigned in the same numbering plan.
4. The system can also be programmed to provide a group of fixed single-digit feature access codes. These
codes allow a station user to dial a single digit to activate specific features. These codes can only be applied
while the station user is receiving ringback or busy tone. The following feature access codes can be dialed
while receiving busy tone:
The following feature access codes can be dialed while receiving ringback tone:
5. The single-digit feature access codes used while receiving ringback tone can be used by Single Line Tele-
phones with a DTMF dialpad, after pressing the FLASH key.
Access Code Feature
2 Call Back, Trunk Queuing Outgoing
3 Executive Override
4 Camp-On (transfer)
5 Camp-On (call waiting)
6 Message Reminder
* Step Call
Access Code Feature
1 Internal Voice/Tone Signaling
2 Call Back
6 Message Reminder