Digi NS7520 DJ Equipment User Manual


 
www.digi.com
      3
About the NS7520
General-purpose I/O pins
16 programmable GPIO interface pins
Four pins programmable with level-sensitive interrupt
Serial ports
Two fully independent serial ports (UART, SPI)
Digital phase lock loop (DPLL) for receive clock extractions
32-byte transmit/receive FIFOs
Internal programmable bit-rate generators
Bit rates 75–230400 in 16X mode
Bit rates 1200 bps–4 Mbps in 1X mode
Flexible baud rate generator, external clock for synchronous operation
Receive-side character and buffer gap timers
Four receive-side data match detectors
Power and operating voltages
500 mW maximum at 55 MHz (all outputs switching)
418 mW maximum at 46 MHz (all outputs switching)
291 mW maximum at 36 MHz (all outputs switching)
3.3 V — I/O
1.5 V — Core
Integrated 10/100 Ethernet MAC
10/100 Mbps MII-based PHY interface
10 Mbps ENDEC interface
Support for TP-PMD and fiber-PMD devices
Full-duplex and half-duplex modes
Optional 4B/5B coding
Station, broadcast, and multicast address detection filtering
512-byte transmit FIFO, 2 Kbyte receive FIFO
Intelligent receive-side buffer size selection