USB DEVICE S3C2410A
13-20
END POINT OUT WRITE COUNT REGISTER (OUT_FIFO_CNT1_REG/OUT_FIFO_CNT2_REG)
These registers maintain the number of bytes in the packet as the number is unloaded by the MCU.
Register Address R/W Description Reset Value
OUT_FIFO_CNT1_
REG
0x52000198(L)
0x5200019B(B)
R
(byte)
End Point out write count register1 0x00
OUT_FIFO_CNT1_REG Bit MCU USB Description Initial State
OUT_CNT_LOW [7:0] R W Lower byte of write count 0x00
Register Address R/W Description Reset Value
OUT_FIFO_CNT2_REG 0x5200019C(L)
0x5200019F(B)
R
(byte)
End Point out write count register2 0x00
OUT_FIFO_CNT2_REG Bit MCU USB Description Initial State
OUT_CNT_HIGH [7:0] R W Higher byte of write count. The
OUT_CNT_HIGH may be always 0
normally.
0x00