IIS-BUS INTERFACE S3C2410A
21-8
IIS FIFO CONTROL (IISFCON) REGISTER
Register Address R/W Description Reset Value
IISFCON 0x5500000C (Li/HW, Li/W, Bi/W)
0x5500000E (Bi/HW)
R/W IIS FIFO interface register 0x0
IISFCON Bit Description Initial State
Transmit FIFO access mode
select
[15] 0 = Normal
1 = DMA
0
Receive FIFO access mode
select
[14] 0 = Normal
1 = DMA
0
Transmit FIFO [13] 0 = Disable 1 = Enable 0
Receive FIFO [12] 0 = Disable 1 = Enable 0
Transmit FIFO data count
(Read only)
[11:6] Data count value = 0 ~ 32 000000
Receive FIFO data count
(Read only)
[5:0] Data count value = 0 ~ 32 000000
NOTES:
1. The IISFCON register is accessible for each halfword and word unit using STRH/STR and LDRH/LDR instructions or
short int/int type pointer in Little/Big endian mode.
2. (Li/HW/W): Little/HalfWord/Word.
(Bi/HW/W): Big/HalfWord/Word.
IIS FIFO (IISFIFO) REGISTER
IIS bus interface contains two 64-byte FIFO for the transmit and receive mode. Each FIFO has 16-width and 32-depth
form, which allows the FIFO to handles data for each halfword unit regardless of valid data size. Transmit and receive
FIFO access is performed through FIFO entry; the address of FENTRY is 0x55000010.
Register Address R/W Description Reset Value
IISFIFO 0x55000010(Li/HW)
0x55000012(Bi/HW)
R/W IIS FIFO register 0x0
IISFIFO Bit Description Initial State
FENTRY [15:0] Transmit/Receive data for IIS 0x0
NOTES:
1. The IISFIFO register is accessible for each halfword and word unit using STRH and LDRH instructions or short int type
pointer in Little/Big endian mode.
2. (Li/HW): Little/HalfWord.
(Bi/HW): Big/HalfWord.