Filter
Top Products
Appendices
994
If the Status is INT or BTH, operating one of the
OASYS’s controllers will affect only that MIDI track.
Simultaneously, the same effect will also apply to any
MIDI track with the same MIDI Channel setting.
In the case of Master Volume, the universal
exclusive message Master Volume will be
transmitted.
You can make settings for MIDI Filter (Sequencer
P3) to enable or disable control changes and
controllers for each track. When checked, the
operations effective for a Status of INT or BTH will
be enabled. Tracks whose Status is EXT, EX2, or
BTH will transmit control changes regardless of this
setting.
Effect dynamic modulation can be controlled when the
Ch (Sequencer 8–7a, 9–2a, 9–3, 9–4) setting for IFX1–12,
MFX1, 2, or TFX1, 2 matches the MIDI channel of the
track selected by Track Select. (In the case of All
Routed, control is possible on the MIDI channel of all
routed tracks.)
If one of the OASYS’s controllers is operated during
realtime recording, the corresponding or assigned
control change will be recorded.
KARMA modules A, B, C, and D can be controlled if
the Input Channel and Output Channel (Sequencer 7–
1c) settings specified for each module are Tch or match
the MIDI channel of the MIDI track selected by Track
Select.
Sampling mode
When one of the OASYS’s controllers is operated, a
control change message will be transmitted on the
global MIDI channel (MIDI Channel Global 1–1a).
In the case of Master Volume, the universal
exclusive message Master Volume will be
transmitted.
It is not possible to make AMS settings in Sampling
mode.