Filter
Top Products
Sequencer mode
414
recommend that you delete unused WAVE files so that
space on the internal hard disk is not occupied
unnecessarily.
Tip: Auto Song Setup
The Auto Song Setup function copies the settings of a
program or combination to a song, and puts you in
record-ready mode. Then you can simply press the
SEQUENCER START/STOP switch to begin recording
immediately. This lets you seamlessly move from
playing a program or combination to producing a
song. For example if you’ve been using the KARMA
function and have come up with a phrase or an idea,
this function lets you easily turn your inspiration into a
song.
Procedure (example: Combination mode)
1. Enter Combination mode.
2. In P0– Prog Select/Mixer page, select the desired
combination and edit the KARMA RTC etc. as
desired.
Note: If you want to save the edited state of the
combination, use the “Update Combination” or
“Write Combination” menu commands.
3. Hold down the ENTER switch and press the
REC/WRITE switch.
The “Setup to Record” dialog box will appear.
4. To execute the Auto Song Setup function, press the
OK button. If you decide not to execute, press the
Cancel button.
You will automatically move to Sequencer mode,
and the settings of the combination will be copied to
the song.
The first unused song will be the copy-destination
song.
Contents automatically copied from a
combination
The copied contents will be the same as when you
execute the page menu command Copy From
Combination with the following settings in the
dialog box.
• IFXs-All, MFXs, TFXs checked
• Multi REC Standby checked
Contents automatically copied from a program
The copied contents will be the same as when you
execute the page menu command Copy From
Program with the following settings in the dialog
box.
• IFXs-All, MFXs, TFXs checked
• with KARMA checked
• To set to MIDI Track 01
• KARMA Module set to A
5. The OASYS will automatically enter record-ready
mode, and the metronome will sound according to
the Metronome setting (Sequencer 0–5d).
6. Press the START/STOP switch to begin realtime
recording. To stop recording, press the
START/STOP switch once again.