Filter
Top Products
Combination: Page Menu Commands ENTER + 0–9: shortcuts for menu commands
405
Combination: Page Menu Commands
ENTER + 0–9: shortcuts for menu
commands
Each page has a set of menu commands, which
provide access to different utilities, commands, and
options, depending on the page you’re currently on.
You can use the menu commands entirely from the
touch-screen, by pressing the menu button in the
upper right-hand corner of the screen and then
selecting an option from the menu that appears.
Even though each page may have its own unique
menu commands, the menus are standardized as much
as possible. For instance, WRITE is almost always the
first menu item in Program, Combination, and
Sequence modes.
You can take advantage of this standardization by
using a shortcut to access any of the first ten menu
items:
1. Hold down the ENTER key.
2. Press a number (0–9) on the numeric keypad to
select the desired menu command, starting with 0.
For instance, press 0 for the first menu command, 1 for
the second, and so on.
If the menu command just toggles an option on and off
(such as Exclusive Solo), then you’re done. If the
command calls up a dialog box, the dialog will appear
on the LCD, and you can proceed just as if you’d
selected the command from the touch-screen.
Write Combination
This command writes an edited Combination into the
OASYS internal memory. It is available on every page
in Combination mode.
This lets you:
• Save your edits
• Rename the Combination
• Assign the Combination to a Category
• Mark the Combination as a Favorite
• Copy the Combination to a different Bank and
number
Be sure to Write any Combination that you wish to
save. An edited Combination cannot be recovered if
you do not write it before turning off the power or
selecting another Combination.
For more information, please see “Write Program” on
page 138.
If you use “Category,” or ‘Sub Category” to specify a
category for the combination you are writing, you will
be able to select that combination by its category or sub
category in Combination P0: Play.
The names of the combination categories can be edited
in “Combi Category” (Global 3–2).
Note: You can also use the SEQUENCER REC/WRITE
switch to write a combination in the same way as
“Write Combination.” Press the SEQUENCER
REC/WRITE switch to open the dialog box, and write
the combination. In this case, the data will be written to
the currently selected combination.
Exclusive Solo
This command is available on every page in
Combination mode. When Exclusive Solo is On, only
one Timbre is soloed at a time; when it is Off, multiple
Timbres can be soloed together.
For more information, please see “Exclusive Solo” on
page 138.
Copy From Program
This command is available on every page in
Combination mode. It copies Effects and/or KARMA
settings from a selected Program to the current
Combination. This lets the Program sound the same as
it did in Program mode.
1. Select “Copy From Program” to open the dialog
box.
2. Use “Program” to select the copy-source program.
3. Select the IFX-All, IFX-All used, MFXs, and TFXs
options to specify which, if any, of the Program’s
effects settings to copy.