Filter
Top Products
Disk: Page Menu Commands Hide unknown files
703
Disk: Page Menu Commands
Hide unknown files
If you select “Hide unknown files,” a check mark will
appear at the left of “Hide unknown files.” In this state,
undefined files will not be shown in the directory
window. However, this is valid only if there are DOS
files in the current directory.
Translation
When Translation is on (checked), you'll see the full
names of the Multisamples and Samples on the disk,
instead of the abbreviated DOS names.
Note that on disk, Multisamples are stored as .KMP
(Korg Multisample Parameter) files, and Samples are
stored as .KSF (Korg Sample Format) files.
Lock/Unlock selected
This locks/unlocks the file or directory that’s selected
in the directory window (0–1c). If you lock the file or
directory, the lock icon (“Lock”) will appear, and
overwriting, copying, or deleting will not be possible.
1. In the directory window (0–1c), select the file or
directory that you want to lock or unlock.
2. Select “Lock/Unlock”; the selected file or directory
will alternately be locked or unlocked.
Load selected
This loads the file or directory selected in the directory
window (0–1c) into internal memory.
1. In the directory window (0–1c), select the file or
directory that you want to load.
2. Select “Load selected.”
A dialog box will appear. The dialog box that
appears will depend on the file you are loading. For
more information, please see page 703.
Specify the various items as necessary.
3. To load the data, press the OK button. If you
decide to cancel, press the Cancel button.
If a file to be loaded cannot be found, or when
loading a file that was saved across media
If a necessary file cannot be found in the current
directory or in a lower directory when loading
multisamples, sample data, .PCG, or .SNG files, a
dialog box like the following (Where is a …) will
appear.
This will appear in the following cases.
• If when loading a .KSC file, a .KMP file used by it
cannot be found.
• If when loading a .KMP file, a .KSF file cannot be
found.
• If when loading an S1000/S3000 format Program
file, a Sample file cannot be found.
• If loading a .KSF file that was larger than the media
capacity and was therefore saved on multiple
media, when the first media has been loaded and
the second media needs to be specified.
• When loading a .PCG file that was split across two
or more volumes of media, when the first volume
has been loaded and the second media is now
required.
• When loading a .PCG file and also simultaneously
loading a .SNG file, if the identically-named .SNG
file is not found in the current directory after
loading the .PCG file.
If this dialog box appears, take the following action.
1. Select the directory that contains the file indicated
by “Where is a…”
If the specified file is located on another media,
exchange media. Then press the directory window
in the LCD screen to make the OASYS recognize the
media, and select the appropriate directory.
It is not possible to open .PCG, .SNG, or .KFX files
in the “Where is a …” dialog box. The Open button
cannot be used for .PCG, .SNG or .KFX files.
2. Press the Select button to resume loading.
Loading will be aborted if you press the Cancel
button. If you want to abort the loading process,
press the OK button. If you press the Skip button,
the indicated file will be skipped, and the next file
will be loaded.
Except for special situations such as when the
media containing the indicated file has been
damaged or cannot be found, you should use the
Select button to continue the loading process.
Load .PCG
Data in the .PCG file will be loaded.