Filter
Top Products
Global mode
650
Global P1: MIDI
1–1: MIDI
Here you can make MIDI-related settings that affect
the entire OASYS. You can also transmit MIDI System
Exclusive data dumps using the page menu
commands in this page. Here you can also specify the
function of the sliders, knobs, and switches when the
control surface CONTROL ASSIGN EXTERNAL
switch is on.
1–1a: MIDI Setup
Basic
MIDI Channel (Global MIDI Channel) [1…16]
Sets the global MIDI channel.
The global MIDI channel is used in the following cases.
• When transmitting and receiving performance data
in Program mode (Program P0: Play) and Sampling
mode.
• When selecting combinations via MIDI in
Combination mode (Combination P0: Play).
• When controlling timbres or effects that have been
set to Gch in various modes
• When transmitting and receiving system exclusive
messages
MIDI received
In Program mode (P0: Play), MIDI data is received on
the global MIDI channel, but in Combination mode
(P0: Play) or Sequencer mode, MIDI data is received on
the MIDI channel specified for each timbre or track.
In Combination mode (P0: Play), program changes
received on the global MIDI channel will switch the
combination (1–1c: MIDI Filter).
Use the global MIDI channel to switch IFX 1–12
(CC#92), MFX1&2 (CC#94) and TFX1&2 (CC#95)
on/off.
To control the pan following IFX, sends 1/2, MFX 1/2
and TFX1/2, use the global MIDI channel when in the
Program or Sampling mode; while in the Combination,
or Sequencer modes, use the channel specified
separately by Ctrl Ch for IFX1–12, MFX1&2, TFX1&2,
and MEQ. By setting Ctrl Ch to Gch, you can control
these parameters from the global MIDI channel.
MIDI output when playing OASYS
In Program mode and Sampling mode, this data will
be transmitted on the global MIDI channel. In
Combination mode, data will be transmitted
simultaneously on the global MIDI channel and on the
MIDI channels of timbres whose Status (Combination
0–1b, 2–1a) is set to EXT or EX2.
In Sequencer mode, musical data will be transmitted
on the channel specified for the currently selected track
(Sequencer 0–1a) (whose Status is BTH, EXT, or EX2).
External mode
In each mode when the control surface CONTROL
ASSIGN EXTERNAL switch is on, you can use the
mixer sliders 1–8, master slider, knobs 1–8, and
switches 1–16 to control a connected computer or MIDI
device.
1–1a
1–1b
1–1PMC1–1c