Filter
Top Products
EXi Program: Page Menu Commands 5–3: Common Keyboard Track
169
EXi Program: Page Menu Commands
Copy EXi Oscillator
This command copies the oscillator settings of a EXi
program.
1. Select “Copy EXi Oscillator” to open the dialog
box.
2. Use the “From” field to select whether to copy
from EXi 1 or EXi 2.
3. Use the “Program” field to select the bank and
number of the source Program. You can also use
the BANK SELECT switches to select a bank.
Note: You can’t select HD-1 Programs here.
If “Tone Adjust too” is checked, the Tone Adjust
settings will be copied along with the rest of the EXi
parameters.
If this is not checked, and the destination (To) had
previously used the same EXi Instrument Type as
the source (From), then the Tone Adjust settings of
the destination will be preserved.
If the EXi Instrument Types were different, all Tone
Adjust settings of the destination will be initialized.
4. Use the “To” field to select the copy-destination
oscillator.
5. Press the OK button to execute the Copy Oscillator
operation, or press the Cancel button if you decide
not to execute.
Copy Step Sequencer
This command copies the step sequencer settings of
the desired EXi program.
1. Select “Copy Step Sequencer” to open the dialog
box.
2. Use the “From” field to select either Common Step
Sequencer or Voice Step Sequencer as the step
sequencer you want to copy.
Voice Step Sequencer lets you copy from the per-
voice step sequencer within an EXi, such as the AL-
1. You can choose to copy from either EXi 1 or EXi 2.
Some EXi, such as the CX-3, don’t have a per-voice
step sequencer. Only EXi which actually contain
per-voice step sequencers will appear in the EXi 1/2
selection.
3. Use the “Program” field to select the bank and
number of the copy-source program.
You can also use the BANK SELECT switches to
select a bank.
Note: You can’t select HD-1 programs.
4. Press the OK button to execute the Copy Step
Sequencer command, or press the Cancel button if
you decide not to execute.
Some AMS settings are not copied
The following AMS-related parameters are not copied:
• Start Step AMS and Intensity
• Sequence Reset AMS and Threshold
• Value AMS Input AMS selection