Filter
Top Products
Modulation and Pitch Shift 064: Stereo Phaser+Tremolo
817
064: Stereo Phaser+Tremolo
This effect combines a stereo phaser and tremolo, with
linked LFOs. Swelling phaser modulation and tremolo
effects synchronize with each other, creating a soothing
modulation effect particularly suitable for electric
piano.
PHASER
Manual [0…100]
Sets the phaser frequency range.
Depth [0…100]
Sets the phaser modulation depth.
Source [Off…Tempo]
Selects the modulation source for the phaser
modulation depth.
Amount [+/–100]
Sets the modulation amount for the phaser modulation
depth.
Resonance [+/–100]
Sets the phaser resonance amount.
Wet/Dry [–Wet, –2:98…Dry…2:98, Wet]
Sets the balance between the phaser effect and dry
sounds. p.817.
TREMOLO
Shape [+/–100]
Sets the degree of the tremolo LFO shaping. p.780.
Depth [0…100]
Sets the tremolo modulation depth.
Source [Off…Tempo]
Selects the modulation source for the tremolo
modulation depth.
Amount [+/–100]
Sets the modulation amount of the tremolo modulation
depth.
LFO
L/R Phase Type [Phaser - Tremolo,
…Phaser LR - Tremolo LR]
Selects the type of the tremolo and phaser LFOs. p.817.
Phaser - Tremolo, Phaser - Tremolo Spin, Phaser -
Tremolo LR, Phaser LR - Tremolo, Phaser LR - Tremolo
Spin, Phaser LR - Tremolo LR.
Phaser/Tremolo Phase [degrees] [–180…+180]
Sets the phase difference between the tremolo and
phaser LFOs. p.817.
Frequency [Hz] [0.02…20.00]
This sets the LFO speed, in Hz. It applies only when
MIDI/Tempo Sync, below, is Off.
Source [Off…Tempo]
This selects a modulation source for the Frequency.
Amount [–20.00…+20.00]
This sets the Frequency modulation amount, in Hz.
MIDI/Tempo Sync [Check-box]
BPM [MIDI, 40.00…240.00]
Base Note […]
Times [x1…x32]
When MIDI/Tempo Sync is on, the LFO speed is set by
BPM, Base Note, and Times, instead of Frequency. For
more information, see “MIDI/Tempo Sync” on
page 777.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see “LFO Type” on page 777.
Common LFO Phase Offset [degrees] [+/–180]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
LFO: L/R Phase Type and Phaser/Tremolo Phase
[degrees]
Select the type of phaser LFO and tremolo LFO for the
“L/R Phase Type” parameter. How the effect sound
moves or rotates depends on the type of LFO. Selecting
“Phaser/Tremolo Phase” enables you to offset the
timing of the phaser peak and control a subtle
movement and rotation of the sound.
PHASER: Wet/Dry and OUTPUT: Wet/Dry
PHASER Wet/Dry sets the balance between the phaser
output and the dry sound. OUTPUT Wet/Dry sets the
balance between the final phaser and tremolo output
level and the dry sound.
Phaser
Phaser
Left
Right
Resonance
LFO Type
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Phaser Wet / Dry
Phaser Wet / Dry
LFO
LFO Phase
LFO Shape
Tremolo
Tremolo