Filter
Top Products
Sequencer mode
480
• 10: Copy From Combination. For more
information, see “Copy from Combination” on
page 526.
• 11: Copy From Program. For more information, see
“Copy From Program” on page 526.
3–3: MIDI Filter3
3–3a: MIDI Filter 3
Track 01 (Track Number)
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
The function of these switches is specified in the Set Up
Controllers page.
These settings are valid if these keys are assigned to
SW1 Mod. (CC#80), SW2 Mod. (CC#81), or
Portamento SW (CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
Global P2– Controller page.
This filter setting is valid when a MIDI control change
is assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
Global P2– Controller page.
This filter setting is valid when a MIDI control change
is assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not
covered in the preceding items MIDI Filter will be
received.
Enable KARMA Waveform SysEx [Off, On]
This allows you to enable or disable the System
Exclusive messages used by KARMA Wave
Sequencing.
Track 02…16 (Track Number)
These are the MIDI Filter 3 settings for MIDI tracks 2
through 16. They are the same as for track 1, as
described above.
▼ 3–3: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Memory Status. For more information, see
“Memory Status” on page 524.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Rename Song. For more information, see
“Rename Song” on page 524.
• 3: Delete Song. For more information, see “Delete
Song” on page 524.
1–1b
1–1a
3–3a
3–3PMC