Filter
Top Products
Appendices
1018
Error and confirmation messages
A (ADC–Are You Sure)
ADC Overload
Meaning: If the ADC OVERLOAD! indication
appears above the Recording Level bar, the signal is
distorting because of an overload at the AUDIO
INPUT stage. To solve this problem:
• Adjust the MIC/LINE gain select switch, the
LEVEL knob (AUDIO INPUT 1 and 2 only), or the
output level of your external audio source.
Are you sure?
Meaning: This message asks you to confirm execution.
To execute press the OK button. To cancel, press the
Cancel button.
B (Buffer)
Buffer overrun error occurred
Meaning: When sampling to external USB media, the
processing could not keep up with the sampling. To
solve this problem:
• Execute the Disk Utility page menu command
Check Medium. Then try the sampling operation
again. If this does not resolve the problem, copy
several files from that media to other media, delete
those files, and then try the sampling operation
again.
Note: Sampling may not be possible because of the
media you’re using. Please use the recommended
types of media. (Media that can be used on the
OASYS.)
Note: If the “Buffer overrun error occurred” error
message appears. the data up to the point the error
occurred has been sampled, but the data at the point
the error occurred may not play back correctly.
Buffer underrun error occurred
Meaning: When playing back a WAVE file from
external USB media, the data could not be read fast
enough for playback processing.
• Copy the file you want to play into another folder,
and then execute the operation again.
Note: Playback may not be possible because of the
media you’re using. Please use the recommended
types of media. (Media that can be used on the
OASYS.)
C (Can’t calibrate–Completed)
Can’t calibrate
Meaning: Calibration could not be performed
correctly.
• Try again.
Can’t execute Audio Track recording
Meaning: You attempted to record audio tracks when
Recording Setup is set to Loop All Tracks
• You cannot perform audio track recording with
Loop All Tracks. Choose a different Recording
Setup, and try recording again.
Meaning: You attempted to record audio tracks with
the Global mode MIDI Clock set to External MIDI or
Auto, and an external MIDI device acting as the MIDI
clock master
• You cannot perform audio track recording when an
external MIDI device is the MIDI clock master. Set
MIDI Clock to Internal so that the OASYS is the
MIDI clock master.
Meaning: If the Global mode Memory Protect
parameter Internal HDD Save is checked, writing to
the internal hard disk is prohibited. This error message
will appear if you attempt to record on audio tracks in
this state.
• Uncheck the Internal HDD Save item, and try the
recording again.
Can’t insert event in stereo track
Meaning: In Sequencer mode, you were performing
audio event editing on an audio track that is assigned
as a stereo pair, and were unable to insert an audio
event because the paired track contained an audio
event.
• Delete the unwanted audio event from the paired
audio track, and then insert the desired event.
Can’t load divided PCG file
Meaning: The page menu command “Load PCG
(RAM) and Samples” cannot be performed on a
divided PCG file.