Filter
Top Products
Effect Guide
840
Reverse Time [msec] [20…2640]
This specifies the maximum time of the reverse
playback. For short, single-note slapback effects, set
the Reverse Time to a low value.
Direct Mix [Always On, Always Off, Cross Fade]
Selects how the dry sound is mixed. For more
information, see “PLAYBACK: Direct Mix” on
page 813.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
090: Sequence BPM Delay
This four-tap delay enables you to select a tempo and
rhythm pattern to set up each tap.
INPUT
Input Level Dmod [%] [+/–100]
Sets the modulation amount of the input level. p.820.
Source [Off…Tempo]
Selects the modulation source for the input level. p.820.
DELAY
BPM [MIDI, 40.00…240.00]
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.840.
Rhythm Pattern […3]
Selects a rhythm pattern. p.840.
Tap1 Pan [L, 1…99, R]
Sets the panning of Tap1.
Tap2 Pan [L, 1…99, R]
Sets the panning of Tap2.
Tap3 Pan [L, 1…99, R]
Sets the panning of Tap3.
Tap4 Pan [L, 1…99, R]
Sets the panning of Tap4.
Feedback [+/–100]
Sets the feedback amount
Source [Off…Tempo]
Selects the modulation source of feedback amount.
Amount [+/–100]
Sets the feedback amount.
High Damp [%] [0…100]
Sets the damping amount in the high range. p.829.
Low Damp [%] [0…100]
Sets the damping amount in the low range. p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
DELAY: BPM and Rhythm Pattern
With the tempo specified by the BPM parameter (or
the MIDI Clock tempo if BPM is set to MIDI), the
length of one beat equals the feedback delay time, and
the interval between taps becomes equal. Selecting a
rhythm pattern will automatically turn the tap outputs
on and off. When BPM is set to MIDI, the lower limit of
the BPM is 44.
Delay
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
Input Level D-mod
+
Tempo
BPM
BPM
Rythm Pattern
Pan