Filter
Top Products
Combination P7: KARMA 7–1: GE Setup/Key Zones
377
Off (unchecked): The selected Module will receive
data from the specified “Input Channel,” and will not
receive data from the Global Input Channel.
On (checked): The selected Module will receive data
from the specified Input Channel and the Global Input
Channel.
This is useful when using a pad on a specific MIDI
Channel to send data into a Module. Turning “Gch
Also” On (checked) allows a keyboard (sending on the
Global Channel) to also control the same Module.
Not available unless the Module’s Input Channel is
set to something other than Gch or global MIDI
channel.
Output Channel [01…16, Gch]
Specifies the MIDI output channel for each KARMA
Module.
The MIDI data from the KARMA Module will be
transmitted on the specified MIDI channel, and will
sound timbres whose channel matches. (See the
diagram below, “KARMA-MIDI Input/Output
Channel.”)
Gch: The MIDI channel will always match the global
MIDI channel (Global P1–1a).
Timbre Thru (when KARMA Off) [Off, On]
Input Channel and Output Channel settings are
normally valid only when the KARMA ON/OFF
switch is on.
As an exception, Timbre Thru specifies whether MIDI
data that has passed through the KARMA Module will
be sent (Thru) to timbres when KARMA is off.
On (checked): When the KARMA function is off, MIDI
data that has passed through the KARMA Module will
be sent via the Output Channel to timbres.
Off (unchecked): When the KARMA function is off,
MIDI data that has passed through the KARMA
Module will not be sent to timbres.
If you wish to apply separate phrases or patterns by
using KARMA Module [A] for timbre 1 and KARMA
Module [B], set the MIDI channels as follows
:
Example setting 1
1. Set the global MIDI channel (Global 1–1a: MIDI
Channel) to 01.
2. Set timbre 1 as follows.
Program Select: Bass program
MIDI Channel (2–1): Gch
3. Set timbre 2 as follows.
Program Select: Piano program
MIDI Channel (2–1): 02
4. Set KARMA Module [A] as follows.
GE Select: Any riff from the Bass GE category
Input Channel: Gch
Output Channel: Gch
Timbre Thru: Off
5. Set KARMA Module [B] as follows.
GE Select: Any riff from the Keyboard GE category
Input Channel: Gch
Output Channel: 02
Timbre Thru: Off
6. Turn the KARMA ON/OFF switch on.
When you play the keyboard, KARMA Module [A]
will play the bass of timbre 1, and KARMA Module [B]
will play the piano of timbre 2. (See “KARMA
ON/OFF=ON (1)(2)” in the diagram above.)
7. Turn the KARMA ON/OFF switch off.
KARMA Module [A]
In : Gch Out : Gch
KARMA Module [B]
In : Gch
Out : 02ch
KARMA ON/OFF = ON (1) (2)
Timbre 1: BassIn : Gch
Timbre 2: Piano
In : 02ch
KARMA Module [A]
In : Gch
Out : Gch
In : Gch
Out : 02ch
Timbre 1: Bass
In : Gch
Timbre 2: Piano
In : 02ch
KARMA Module [B]
Timber Thru
KARMA ON/OFF = OFF (1)
KARMA Module [A]
In : Gch
Out : Gch
In : Gch
Out : 02ch
Timbre 1: Bass
In : Gch
Timbre 2: Piano
In : 02ch
KARMA Module [B]
Timber Thru
■
KARMA ON/OFF = OFF (2)