Filter
Top Products
Program mode: HD-1
102
Envelope1/Envelope2/Envelope3 [Off, On]
Specifies whether to transmit the various MIDI
messages or other functions generated by Envelope 1,
Envelope 2, and Envelope 3 of the GE selected by the
KARMA Module.
If Envelope 1, Envelope 2, or Envelope 3 are
producing pitch bend messages, these settings will
be ignored, and the “GE Bend” setting will be used.
GE Notes [Off, On]
Specifies whether the MIDI note-on/note-off messages
generated by the KARMA Module will be transmitted.
Note: This setting lets you mute the note phrases
generated by the KARMA Module, and use only the
control data generated from the KARMA Module (e.g.,
pan, filter cutoff, resonance) to apply modulation to
phrases or chords you yourself play on the keyboard.
WaveSeq [Off, On]
Specifies whether the wave sequence data
(multisample number) generated by the KARMA
Module will be transmitted.
7–2c: CC Offset
When the KARMA function is turned on, MIDI control
change messages can be transmitted to the tone
generator. Make these settings when you wish to
control the program sound or effects etc. when the
KARMA function is turned on.
You can assign up to four MIDI control changes for
each KARMA Module.
1, 2, 3, 4
CC Number [Off, MIDI CC# 00…MIDI CC# 95]
Selects the MIDI control change message that will be
transmitted.
The value of the transmitted message is specified by
“Value”.
If the KARMA ON/OFF switch is on, the specified
MIDI control change message will be transmitted
when you select a program whose KARMA
ON/OFF switch is turned on. If the selected GE
produces the control change specified here, the
effect of the control change produced by the GE will
be given priority.
Note: The MIDI control change messages specified
here for transmission and the MIDI control change
messages produced by the selected GE when the
KARMA ON/OFF switch is On will be reset
automatically when the KARMA ON/OFF switch is
turned off.
Value [000…127]
Specifies the value of the message that will be
transmitted.
This will have no effect if “CC Number” is Off.
▼ 7-2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Write Program. For more information, see “Write
Program” on page 138.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Copy KARMA Module. For more information,
see “Copy KARMA Module” on page 146.
• 3: Initialize KARMA Module. For more
information, see “Initialize KARMA Module” on
page 147.
• 4: Copy Scene. For more information, see “Copy
Scene” on page 147.
• 5: Swap Scenes. For more information, see “Swap
Scene” on page 147.
• 6: Capture Random Seed. For more information,
see “Capture Random Seed” on page 147.