Filter
Top Products
Sequencer mode
524
Sequencer: Page Menu Commands
Memory Status
If you select “Memory Status,” the remaining amount
of sequencer memory will be displayed.
Exclusive Solo
This specifies how the Solo function will operate. Each
time you select “Exclusive Solo,” the setting will
alternate between multiple solo and exclusive solo. For
details, see “Exclusive Solo” on page 138.
Rename Song
Here you can rename the selected song. You can enter a
name of up to 24 characters. For more information, see
“Editing names” on page 166 of the Operation Guide.
Delete Song
This command deletes the currently selected song.
1. Select “Delete Song” to open the dialog box.
2. If you wish to execute the Delete Song command,
press the OK button. To cancel, press the Cancel
button.
When you execute, the performance data and
settings of the currently selected song will be
deleted.
WAVE files and their regions will not be deleted. If
you want to delete this data, use the “Delete
Unused WAV Files” (Disk u) menu command.
Copy From Song
This command copies all of the setting data and
musical data from the specified song to the currently
selected song.
1. Select “Copy From Song” to open the dialog box.
2. In “From,” specify the copy source song number.
3. Select the data that you wish to copy.
All: will copy all setting data and musical data
(track events and audio events, etc.).
Without Track/Pattern Events: will copy only the
setting data of songs, except for Play Loop and
RPPR data.
4. To execute the Copy Song operation, press the OK
button. To cancel, press the Cancel button.
Be aware that if you execute “All,” all setting data
and musical data of the currently selected song will
be erased and rewritten by the data from the copy
source song.
If you execute “Without Track/Pattern Events,”
song setting data other than Play Loop and RPPR
will be rewritten.
Load Template Song
This command loads a template song as a song.
The built-in sequencer contains eighteen different
preset template songs (P00–17) that contain preset
settings for programs and effects appropriate for
various musical styles. You are also free to create your
own favorite settings for programs, track parameters,
and effects, and save them as one of sixteen user
template songs (U00–15) (See “Save Template Song”).
1. Select “Load Template Song” to open the dialog
box.
2. In “From,” specify the template song that you
wish to load.
3. If you check “Copy Pattern to Track too?,” the
“Copy Pattern To Track” dialog box will appear
automatically after “Load Template Song” has
been executed.
If you execute without checking this, only the
template song you specified in step 2 will be loaded.
4. To load the template song, press the OK button. To
cancel without loading, press the Cancel button.
When you execute, song settings other than Play
Loop and RPPR will be copied.
If in step 3 you checked “Copy Pattern to Track
too?” and pressed the OK button, the “Copy Pattern
To MIDI Track” dialog box will appear.