Filter
Top Products
Combination mode
370
Enable Realtime Control Knob 5 [Off, On]
Enable Realtime Control Knob 6 [Off, On]
Enable Realtime Control Knob 7 [Off, On]
Enable Realtime Control Knob 8 [Off, On]
These specify whether MIDI message will be received
for Realtime Control knobs 5 through 8.
Timbres 02…16
These are the MIDI Filter2 settings for timbres 2
through 16. They are the same as for timbre 1. See
“Timbre 01”.
▼ 3–2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Write Combination. For more information, see
“Write Combination” on page 405.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Copy From Program. For more information, see
“Copy From Program” on page 405.
3–3: MIDI Filter3
3–3a: MIDI Filter3
Timbre 01
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
The function of these switches is specified in the P1–
Set Up Controllers page.
These settings are valid if these keys are assigned to
SW1 Mod. (CC#80), SW2 Mod. (CC#81), or
Portamento SW (CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
Global P2– Controller page.
This filter setting is valid when a MIDI control change
is assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
Global P2– Controller page.
This filter setting is valid when a MIDI control change
is assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not
covered in the preceding items MIDI Filter will be
received.
Enable KARMA Waveform SysEx [Off, On]
This allows you to enable or disable the System
Exclusive messages used by KARMA Wave
Sequencing.
3–3a
3–3PMC
1–1a
1–1b